Introduction
If you are looking for a flexible way to upgrade a single-door entry point, the MENGQI-CONTROL Electric Strike Lock Complete TCP/IP Network Single Door Access Control Board System Kit is worth a close look. Designed around networked access control, this kit combines an electric strike lock, TCP/IP access control board, 110V metal power supply, RFID reader, exit button, and phone-based remote door control into one practical package. For offices, small businesses, rental properties, workshops, storage areas, and other controlled-entry locations, the combination is designed to make everyday access more convenient while providing a more organized alternative to a conventional mechanical lock.The keyword “biometric door access system Kit” is often associated with modern electronic entry solutions, although this particular MENGQI system uses RFID credentials rather than a biometric fingerprint or facial-recognition reader. That distinction matters when evaluating the product. Instead of relying on fingerprints, the included RFID reader provides credential-based access, while the network connection and phone app add remote-management convenience.
Features
TCP/IP Network Access Control
One of the most useful features of this system is its TCP/IP network connectivity. Rather than functioning as an isolated electronic lock, the access-control board is designed to communicate through a network. This can make remote management and integration considerably more convenient for locations where the administrator does not want to operate the door manually every time access is required.Network-based access control can be particularly useful in small offices and commercial environments. An administrator can manage the door from a connected device instead of having to remain physically near the entrance. For a single-door installation, that can provide a useful balance between centralized control and relatively straightforward hardware.
Electric Strike Lock
The electric strike is the physical locking component of the package. Compared with replacing an entire door assembly with a specialized electronic lock, an electric strike can be an attractive approach when the existing door and frame can accommodate this type of installation.The actual installation requirements depend on the door construction, frame, strike dimensions, wiring arrangement, and existing hardware. Before purchasing or installing the system, it is important to verify that the strike is compatible with the specific door configuration.
RFID Reader
The included RFID reader provides a convenient credential-based entry method. Users can present an appropriate RFID credential to the reader rather than carrying a traditional physical key.This is especially practical for environments where multiple people need access. RFID credentials can be easier to distribute and manage than conventional keys, while the electronic control board provides the mechanism for controlling the door.
Exit Button
The kit also includes an exit button, providing a straightforward way to leave from the controlled side of the door. This keeps the everyday operation simple: authorized users can enter through the electronic access system, while occupants can use the exit control when leaving.For an office, workshop, utility room, or similar space, having the exit button included in the package means fewer separate components have to be sourced during installation.
110V Metal Power Supply
Power management is another important part of an access-control installation. This package includes a 110V metal power supply intended to provide power for the system components.Because mains voltage is involved, installation should be handled carefully and according to applicable electrical requirements. If you are not qualified to work with mains electrical wiring, professional installation is the safer approach.
Phone App Remote Door Control
Remote operation is one of the more interesting aspects of the MENGQI-CONTROL system. The phone app functionality is designed to let an authorized user remotely open the door.That can be useful when a visitor, employee, contractor, or delivery person needs temporary access and the administrator is not standing beside the entrance. It can also reduce the need to physically walk to the door for routine access requests.
Single-Door Configuration
This is fundamentally a single-door access-control solution. That makes it more appropriate for a focused installation rather than a large facility requiring dozens of individually managed entrances.For a small office, workshop, private storage area, rental property, or home entrance, a single-door system can be enough to provide electronic access without introducing unnecessary complexity.
Pros & Cons
| Pros | Cons |
|---|---|
| Combines electric strike, controller, RFID reader, exit button, and power supply | Installation requires wiring and proper door-hardware compatibility |
| TCP/IP networking supports connected access control | Designed around a single-door configuration |
| Phone app provides remote door-opening convenience | The included RFID reader is not a biometric fingerprint reader |
| RFID access avoids handing out traditional mechanical keys | 110V electrical installation requires appropriate safety precautions |
| Useful for offices, workshops, rentals, and controlled-entry areas | Network and app functionality depends on proper setup and connectivity |
| Includes several essential components in one kit | Professional installation may be preferable for complex door setups |
Performance
In practical use, the appeal of the MENGQI-CONTROL kit comes from the way several access-control functions are brought together. Instead of installing an electronic strike separately, finding a compatible access controller, sourcing a reader, purchasing an exit button, and arranging a separate power solution, this package is intended to provide those major components as one system.
The RFID reader makes routine entry relatively straightforward. For an organization with several authorized users, credential-based access can be more convenient than distributing and recovering physical keys. It also creates a more modern entry experience without requiring the user to interact with a traditional key cylinder.The TCP/IP controller adds another layer of convenience. Network connectivity is useful when the access point needs to be managed from a connected device rather than exclusively through a local control mechanism. This becomes especially valuable for small-business owners or property managers who may need to respond to access requests while working elsewhere.The phone app remote-opening feature can also be practical in real-world situations. Imagine a contractor arriving at a secured workspace while the manager is in another room, another building, or away from the property. Remote door control can eliminate the need for someone to physically unlock the door.
The electric strike itself is central to the system’s physical operation. However, the performance of any electric strike installation depends heavily on correct alignment and installation. A door that binds, sags, or does not align properly with the strike can create problems regardless of how capable the electronic controller is.For this reason, installation quality should be considered part of the overall system performance. The door frame should be examined carefully, wiring should be secured appropriately, and the power supply should be installed according to electrical safety requirements.Another consideration is the distinction between RFID access and biometric access. If your search began with the phrase “biometric door access system Kit,” it is important not to assume that this particular kit includes fingerprint or facial recognition. Its included reader is RFID-based. Users specifically seeking biometric authentication should verify the reader technology and system compatibility before purchasing.
Installation Considerations
A successful installation starts with the door. Check the existing lock and frame to determine whether an electric strike can be installed without extensive modification. Door material, frame construction, latch dimensions, and swing direction can all affect compatibility.The network connection is another important consideration. Since the system incorporates TCP/IP functionality, the installation location needs an appropriate network connection and suitable configuration. Reliable networking can be especially important when remote access is one of the main reasons for choosing this type of system.Power should also receive careful attention. The included 110V metal power supply means the installation involves mains electricity. Proper electrical practices are essential, and local codes or regulations may apply. When in doubt, a qualified electrician or access-control installer should handle the electrical portion.
Who Is This System For?
The MENGQI-CONTROL kit makes the most sense for users who need electronic control over one entrance and want several access methods in a single package.Small offices can use it to control employee entry. Workshops can use electronic access to restrict entry to authorized users. Rental-property owners may appreciate remote opening when coordinating with guests or service providers. Storage areas and utility rooms can also benefit from a controlled-entry setup.For larger commercial buildings with many doors, a dedicated multi-door access-control platform may be more appropriate. This particular kit is better understood as a single-door solution rather than a complete enterprise access-management platform.If you are researching related equipment for a broader smart-property or technology setup, you can also explore this Related Guide.
Ease of Everyday Use
Once correctly installed and configured, the system is designed around relatively simple daily interactions. Authorized users can use RFID access at the reader, occupants can use the exit button, and an administrator can use the connected phone functionality when remote access is needed.That combination is useful because different situations call for different access methods. An employee may prefer RFID access for routine entry, while a manager may use remote opening for a visitor. Having multiple control methods can reduce friction at the door.The system also reduces dependence on physical keys. That can be particularly useful in workplaces where personnel changes regularly and access credentials need to be managed electronically.
Security and Access Management
Electronic access control should be evaluated as one component of a broader security strategy. An access-control system can help regulate who is permitted to enter, but overall security also depends on door construction, physical hardware, network security, credential management, installation quality, and appropriate administrative practices.For the MENGQI system, administrators should protect network credentials and app access just as carefully as they would protect physical keys. RFID credentials should also be issued only to authorized users and managed responsibly.The fact that the product uses RFID rather than biometric identification may be an advantage or limitation depending on the intended application. RFID is convenient and familiar, while biometric systems use a different authentication method. The right choice depends on the site’s access requirements.
FAQ
Is this a biometric door access system?
No. Although it can appear in searches for a biometric door access system Kit, the included reader is an RFID reader rather than a fingerprint or facial-recognition biometric reader. Buyers specifically requiring biometric authentication should verify compatibility with a suitable biometric reader or controller.
Does the kit support remote door opening?
The product is designed with phone app functionality for remotely opening the door. Proper network configuration and app setup are required for this feature to function as intended.
Is this system for one door?
Yes. The product is described as a single-door TCP/IP access-control system, making it particularly suited to one controlled entrance.
Does it include an RFID reader?
Yes. An RFID reader is included as part of the kit, providing credential-based access for authorized users.
Does it include an exit button?
Yes. The package includes an exit button for convenient operation from the secured side of the entrance.
Does it include a power supply?
Yes. The kit includes a 110V metal power supply. Because mains voltage is involved, electrical installation should be performed with appropriate safety precautions and by a qualified professional where required.
Can it be installed on any door?
Not necessarily. Electric strike compatibility depends on the door, frame, existing latch, dimensions, alignment, and installation configuration. Always verify the physical specifications before installation.
Is TCP/IP useful for a single door?
It can be. Even with one entrance, network connectivity can provide remote management and connected access functionality. The benefit depends on whether remote control and network-based administration are useful for your particular installation.
Is RFID better than a traditional key?
It depends on the application. RFID can make credential distribution and electronic access management more convenient, while a conventional key is simpler and does not require electronic power or networking. The appropriate choice depends on the property’s access requirements.
Who should consider this MENGQI-CONTROL kit?
It is worth considering for users who need electronic control of a single door and want RFID access, an electric strike, TCP/IP connectivity, an exit button, and phone-based remote opening in one package.
Final Thoughts
The MENGQI-CONTROL Electric Strike Lock Complete TCP/IP Network Single Door Access Control Board System Kit brings together several useful components for a controlled single-door installation. Its combination of an electric strike, TCP/IP controller, RFID reader, exit button, 110V power supply, and phone app remote-opening capability gives it a versatile feature set for small offices, workshops, rental properties, storage areas, and similar environments.The most important buying consideration is matching the system to your actual requirements. This is an RFID-based electronic access solution, not a biometric fingerprint or facial-recognition system, so buyers should distinguish between those technologies before ordering. Door compatibility, network configuration, electrical installation, and credential management should also be considered carefully.For someone seeking a connected single-door access solution with multiple ways to control entry, the MENGQI-CONTROL package provides a practical collection of components in one kit. With appropriate installation and configuration, it can turn a conventional entry point into a more connected and manageable access-control setup.